A Torch, Hammer, Goniopora, Lobophyllia or other fleshy stony coral suddenly looks pale.
Maybe it retracts during the brightest part of the day.
Maybe white skeleton becomes more visible.
A common reaction is:
“The PAR is too high.”
Another is:
“The coral is starving.”
Either may sometimes be relevant.
But neither can be diagnosed from appearance alone.
Coral bleaching can involve interactions among:
- light intensity;
- recent changes in light;
- temperature;
- nutrient availability;
- feeding;
- water chemistry;
- flow;
- physical damage;
- coral species and symbiont identity.
The first question should therefore not be:
What PAR should an LPS coral have?
It should be:
Is this actually bleaching, what changed recently, and what environment is the coral experiencing now?
First: “LPS” Is Not One Biological Group
“LPS” — Large Polyp Stony coral — is useful aquarium terminology.
It is not a formal biological classification.
The aquarium category includes corals such as:
- Euphyllia and Fimbriaphyllia;
- Goniopora;
- Galaxea;
- Lobophyllia;
- Micromussa;
- Catalaphyllia;
- Caulastrea;
and many others.
These corals can differ substantially in:
- natural depth;
- tissue structure;
- symbionts;
- feeding strategy;
- light history;
- photoprotective capacity.
Therefore a statement such as:
“All LPS bleach above 200 PAR.”
or:
“250 PAR is the maximum safe level for LPS.”
does not have a sound biological basis.
There is no single bleaching threshold shared by everything reef keepers call LPS.
What Does Coral Bleaching Actually Mean?
Coral bleaching is not simply:
“The coral looks white.”
Bleaching generally involves the loss of photosynthetic algal symbionts — Symbiodiniaceae — from coral tissue, loss of their pigments, or both.
Because coral tissue is often relatively translucent, losing these symbionts and pigments allows the white calcium-carbonate skeleton beneath the tissue to become much more visible.
A bleached coral is therefore not necessarily dead.
Living tissue may still cover the skeleton.
If environmental stress is reduced and the symbiosis recovers, pigmentation can return. NOAA likewise distinguishes bleaching from coral mortality.
Bleaching and Tissue Recession Are Not the Same Thing
This distinction is extremely important in an aquarium.
Bleaching
Living coral tissue remains present but becomes:
- unusually pale;
- translucent;
- washed out;
- or nearly white.
Tissue recession
The living tissue itself has disappeared from part of the skeleton.
You may see:
- exposed skeletal ridges;
- a sharp boundary between living tissue and bare skeleton;
- progressive tissue loss;
- algae beginning to colonize previously living areas.
These are different observations.
If tissue is physically disappearing, do not treat the problem as simply:
“Reduce PAR.”
Light may still be involved, but tissue recession can also be associated with:
- injury;
- flow damage;
- chemistry instability;
- neighboring coral aggression;
- infection or disease processes;
- other environmental stress.
So before changing the lights, determine:
Is the living tissue still there?
Polyp Retraction Does Not Prove That PAR Is Too High
A coral that retracts during the day may indeed be responding to light.
But retraction can also change with:
- water flow;
- feeding;
- disturbance;
- time of day;
- nearby organisms;
- general physiological stress.
Similarly, a coral that expands more at night is not automatically:
“hiding from excessive PAR.”
Many corals naturally change expansion and feeding behavior through the day-night cycle.
Polyp behavior is useful information.
It is not a stand-alone light meter.
Light Stress Is Real
None of this means light stress is unimportant.
High irradiance can contribute to photoinhibition and bleaching, particularly when combined with other environmental stress.
Experimental coral research has repeatedly shown that elevated irradiance can increase bleaching severity, especially under elevated temperature.
For example, experiments exposing corals to combined heat and light stress found faster and more severe bleaching under higher irradiance, while responses also varied substantially depending on the coral host and its symbionts.
The important point is:
Light stress is real, but there is no universal LPS PAR number at which it begins.
Temperature Can Change the Coral’s Tolerance to Light
A light level tolerated under normal aquarium temperature may become much more stressful during a heat event.
High temperature can impair photosynthetic processes in the coral–algal symbiosis.
When strong light is present at the same time, excess excitation energy can increase photo-oxidative stress.
This is why coral bleaching in nature is strongly associated with heat stress, with high irradiance often worsening the response.
NOAA specifically identifies temperature and light among environmental factors capable of triggering bleaching.
So if a coral suddenly becomes pale, do not check only:
the current temperature.
Look at:
temperature history.
Ask whether there was:
- a heater malfunction;
- an unusually hot day;
- reduced cooling;
- a short temperature spike;
- repeated daily temperature elevation.
By the time the coral visibly changes, the tank may already have returned to its normal temperature.
Light History Matters
One of the most useful reef-lighting principles is:
The coral’s previous light environment matters.
Consider two Hammer corals.
Coral A
Previously lived for months at:
80 µmol/m²/s
Coral B
Previously lived for months at:
180 µmol/m²/s
Now both are moved to:
220 µmol/m²/s
The final PPFD is identical.
The magnitude of the change is very different.
Coral A experienced a large increase.
Coral B experienced a relatively modest increase.
That difference can matter more than whether an internet chart calls 220 PAR “safe for LPS.”
Euphyllia Research Shows How Strong Photoacclimation Can Be
A particularly relevant study followed Euphyllia paradivisa for an entire year under different light environments.
The corals were originally collected from approximately:
40–50 m depth
and maintained under:
- shallow-water-style full-spectrum light;
- mesophotic blue light;
- or darkness.
After a year, the corals showed major physiological differences depending on their light history.
The measured minimum saturating irradiance, Iₖ, was approximately:
115 µmol photons/m²/s
for shallow-light-acclimated corals
and:
64 µmol photons/m²/s
for mesophotic-light-acclimated corals.
These values should not be interpreted as aquarium PAR limits.
Iₖ is a photosynthetic parameter.
It does not mean:
64 PAR is ideal for Euphyllia
or:
115 PAR is the maximum safe level.
The useful lesson is different:
The same species changed its light physiology substantially depending on its previous light environment.
That is why acclimation history matters.
Rapid Light Changes Deserve Special Attention
When a coral starts bleaching shortly after a lighting change, ask exactly what changed.
Common examples include:
- moving the coral higher;
- installing a more powerful fixture;
- increasing LED intensity;
- extending photoperiod;
- removing a diffuser;
- removing shading from another coral or rock;
- cleaning a heavily salt-coated light cover;
- changing spectrum substantially.
Measure the actual underwater PPFD before and after the change when possible.
Do not rely only on:
“The light went from 40% to 50%.”
LED percentage is not an underwater photon measurement.
Spectrum Matters Too
Two fixtures can produce the same PAR reading while producing different spectral distributions.
A PAR meter measures photons across its defined photosynthetically active range.
It does not tell you how those photons are divided among:
- violet;
- blue;
- cyan;
- green;
- red.
Coral symbionts and host pigments can respond to spectral composition as well as total photon flux.
Therefore:
same PAR ≠ identical light environment.
This matters particularly when changing between very different reef-light fixtures or programming substantially different channel ratios.
Nutrient Limitation Can Also Produce a Bleached Appearance
A pale coral is not automatically receiving too much light.
A 2023 long-term Nature study maintained multiple coral species under either nutrient-replete or strongly nutrient-limited conditions.
In nutrient-limited conditions:
- growth and calcification began to stagnate;
- corals lost more than half of their symbiont population;
- and they developed a visibly bleached appearance.
Corals supplied with adequate dissolved inorganic nitrogen and phosphorus maintained much stronger growth and more stable symbiont populations.
This provides an important aquarium lesson:
A coral can look bleached even when excessive light is not the only explanation.
This Does Not Mean “Dose Nitrate and Phosphate Whenever a Coral Looks Pale”
That would be the opposite mistake.
Nutrient relationships in coral symbiosis are complex.
Problems can involve:
- insufficient nutrient availability;
- excessive nutrient loading;
- imbalance between nitrogen and phosphorus;
- interactions with light and temperature.
Therefore:
pale coral ≠ automatically add nutrients.
Instead, review nutrient history.
Ask:
- Has nitrate remained extremely low?
- Has phosphate remained undetectable?
- Did nutrient levels change recently?
- Did the change happen at the same time as lighting or filtration changes?
Trends are usually more useful than one isolated test result.
“Hungry” Is Too Vague to Be a Diagnosis
Photosymbiotic corals obtain energy and nutrients through several pathways.
Photosynthesis
Their Symbiodiniaceae produce photosynthetically derived carbon compounds that support the coral host.
Dissolved nutrients
The coral–symbiont partnership can acquire and recycle nitrogen and phosphorus.
Heterotrophic feeding
The coral animal can capture particulate food and plankton.
These pathways interact.
A coral may be:
- receiving strong light but limited nutrients;
- receiving adequate nutrients but little prey;
- relying more heavily on heterotrophy during stress;
- losing photosynthetic energy during bleaching.
Therefore:
“The coral is hungry”
does not identify what is actually limiting the animal.
Feeding May Help — But It Is Not a Diagnostic Test
Feeding can support energy and nutrient acquisition in many corals.
It may be particularly important when photosynthetic energy supply is impaired.
But this does not mean:
Feed the coral.
If it improves, lack of food caused the bleaching.
That conclusion would be too strong.
If a coral improves after feeding, you have learned that additional nutrition may have been beneficial.
You have not proven that nutrition was the only original cause of the problem.
The same applies to lowering light.
If the coral improves after dimming the fixture, reduced irradiance may have helped.
That does not prove light was the only stressor.
Very Low Light Is Not Automatically Safe Either
Too much light can cause stress.
But chronically insufficient light can also reduce photosynthetic energy supply.
The Euphyllia paradivisa experiment provides an extreme example.
Corals maintained in complete darkness for one year lost their symbionts and became completely bleached.
That does not mean aquarium Euphyllia requires intense light.
It simply demonstrates that:
“lower light” and “safer light” are not always the same thing.
Photosynthetic corals require an appropriate light environment, not zero photons.
Bleaching Does Not Mean the Coral Is Dead
A bleached coral can still contain living tissue.
That means recovery may be possible if the stress is reduced and the coral retains enough energy to survive until its symbiosis and pigmentation recover.
NOAA specifically notes that bleached corals can survive, although prolonged or severe bleaching increases mortality risk.
During recovery, avoid repeatedly changing multiple variables.
Stability becomes especially important.
A Better Diagnostic Workflow
When an LPS coral becomes pale, retracted or partially white, use a systematic process.
Step 1 — Determine whether living tissue is still present
Look closely under normal white illumination.
Ask:
Can I still see translucent or pale living tissue covering the skeleton?
If yes, bleaching or pigment loss is possible.
If tissue itself is disappearing, treat it as tissue recession rather than simply “light bleaching.”
Step 2 — Measure underwater PAR
Measure the actual PPFD at the coral.
Place the sensor approximately where the coral tissue receives the light.
Record the measurement.
Do not substitute:
- fixture percentage;
- surface PAR;
- manufacturer’s output;
- visual brightness.
Blue reef lighting can appear relatively dim to human eyes while still producing substantial photon flux.
Step 3 — Compare with the previous light environment
Ask:
What PAR was this coral receiving before the problem started?
If possible, compare:
previous PPFD → current PPFD
rather than only looking at the final number.
For example:
90 → 200 µmol/m²/s
is much more informative than simply saying:
“The coral is at 200 PAR.”
Step 4 — Review recent lighting changes
Check whether you recently:
- moved the coral;
- changed fixture height;
- changed intensity;
- changed spectrum;
- extended photoperiod;
- removed shade.
A clear timing relationship between a large lighting change and bleaching increases the plausibility of light stress.
Step 5 — Check temperature history
Look at logged maximum and minimum temperatures.
Do not rely only on the current reading.
Pay particular attention to temperature changes occurring around the same time as increased light exposure.
Step 6 — Review nutrient trends
Check:
- nitrate;
- phosphate.
Look for trends over days and weeks rather than treating one reading as the complete diagnosis.
Persistent nutrient limitation belongs in the diagnostic picture, especially when a coral is becoming unusually pale without a clear light change.
Step 7 — Review water chemistry stability
Check whether there have been significant changes in:
- salinity;
- alkalinity;
- calcium;
- magnesium;
- pH.
For diagnosis, stability and recent change are often more informative than chasing one supposedly perfect number.
Step 8 — Check water flow and physical irritation
For fleshy stony corals, inspect whether:
- direct flow is repeatedly folding tissue against the skeleton;
- the coral is touching sharp rock;
- a neighboring coral can reach it;
- fish or invertebrates are irritating the tissue.
These problems may produce retraction or tissue damage that can be mistaken for a lighting issue.
Step 9 — Review feeding
Ask:
- Has feeding changed?
- Is the coral still showing feeding behavior?
- Is food reaching the coral?
- Is the system extremely nutrient-poor?
Feeding is part of the energy budget.
It is not a replacement for correcting environmental stress.
If Light Stress Is the Most Likely Explanation
Suppose:
- living tissue is still present;
- the coral became pale after a major measured light increase;
- there was no obvious chemistry instability;
- temperature is stable;
- there is no progressive tissue recession.
Then excessive or abruptly increased light becomes a reasonable working hypothesis.
The goal is not to find a universal percentage reduction.
Instead:
- determine the previous tolerated light exposure;
- reduce the sudden difference;
- keep other parameters stable;
- allow time for photoacclimation;
- measure again before making another increase.
Avoid changing intensity every day.
Coral photoacclimation takes time.
Do Not Chase Coral Color Every Day
Coral color depends on:
- symbiont abundance;
- algal pigments;
- host fluorescent proteins;
- light spectrum;
- nutrition;
- stress state.
Changes can take days or weeks.
Repeatedly adjusting:
- spectrum today;
- intensity tomorrow;
- flow the next day;
- nutrients after that
makes diagnosis much harder.
Change as few variables as possible.
Then observe the trend.
Practical Symptom Guide
| Observation | Possible explanations | What it does NOT prove |
|---|---|---|
| Pale/translucent tissue | Bleaching, pigment reduction, nutrient or environmental stress | PAR is definitely too high |
| Bare white skeleton | Tissue recession/loss | Simple bleaching |
| Retraction during peak lighting | Light response, flow, irritation, stress | Excessive PAR |
| Strong nighttime expansion | Normal behavior, feeding response | Daytime light is harmful |
| Darker/browner coral | Symbiont or pigment change, acclimation | PAR is definitely too low |
| Poor growth | Light, nutrition, chemistry, temperature or other limitation | Needs stronger lighting |
| Improvement after feeding | Additional nutrition helped | Starvation was the sole cause |
| Improvement after lowering PAR | Reduced exposure helped | High PAR was the only cause |
The last column is often the most important.
Why Generic “LPS PAR Charts” Should Be Used Carefully
Broad aquarium PAR ranges can still be useful as initial placement guides.
But they should not be presented as biological thresholds.
The Euphyllia paradivisa experiment demonstrates why.
After long-term acclimation to different light environments, the same species showed very different photosynthetic characteristics.
Therefore the better hierarchy is:
individual coral history
then:
species
then:
generic LPS category.
Not the other way around.
Why Underwater Measurement Matters
Do not assume that:
50% LED output = 100 PAR
or:
a coral halfway down the tank receives half the surface PAR.
Actual underwater PPFD depends on:
- fixture;
- lenses and diffusers;
- mounting height;
- water depth;
- rock shading;
- water clarity;
- measurement position.
Measure where the coral actually lives.
A reef PAR meter such as AquaHorti AH-Reef can be used underwater to compare coral positions and check how much PPFD reaches different areas of the reef structure.
The purpose of the measurement is not to produce a universal “pass/fail” number.
It is to answer:
What light is this coral actually receiving, and how has that exposure changed?
Frequently Asked Questions
Does high PAR cause LPS coral bleaching?
It can contribute to bleaching, particularly after an abrupt increase or when combined with heat or other stress.
But there is no universal LPS bleaching PAR threshold.
Is 200 PAR too much for an LPS coral?
Not necessarily.
Some corals may be well acclimated to that exposure, while another coral moved suddenly from much lower light may experience significant stress.
Light history matters.
Is 250 PAR safe for a Torch coral?
A single number cannot establish safety.
Measure the coral’s current PPFD and compare it with the environment it was previously adapted to.
Can low nutrients cause pale coral?
Yes.
Long-term experimental research has demonstrated loss of symbionts and a bleached appearance under strong nutrient limitation.
Does a bleached coral need more food?
Feeding may support some corals during stress and recovery, but a bleached appearance does not by itself prove insufficient feeding.
Should I lower the light immediately if my LPS looks pale?
First check whether tissue is present and review recent light changes, temperature, nutrient history and water stability.
If bleaching followed a large measured increase in light and other conditions are stable, reducing the abrupt exposure may be reasonable.
Does white skeleton always mean bleaching?
No.
If living tissue has disappeared and the skeleton is exposed, that is tissue loss or recession rather than simply bleaching.
Can a bleached coral recover?
Yes.
Bleached coral tissue can remain alive, and recovery is possible if the stress is not too severe or prolonged.
Does a coral that expands at night need less light?
Not necessarily.
Expansion and feeding behavior vary with species and time of day.
Nighttime expansion alone does not diagnose excessive PAR.
Does brown coloration mean too little light?
Not automatically.
Symbiont abundance, pigments, nutrition and acclimation can all affect color.
Should reef light changes be made gradually?
For a coral already adapted to one light environment, avoiding abrupt large increases is a sensible approach because photoacclimation takes time.
Key Takeaway
When an LPS coral becomes pale, do not immediately conclude:
“PAR is too high.”
And do not immediately conclude:
“It needs more food.”
Bleaching is a condition, not a complete diagnosis.
Research shows that:
- excessive or rapidly increased irradiance can contribute to bleaching;
- heat can greatly increase sensitivity to light stress;
- the same coral species can photoacclimate to very different light environments;
- severe nutrient limitation can also reduce symbiont populations and produce a bleached appearance;
- feeding and dissolved nutrients contribute to coral energy and nutrient balance;
- tissue recession is different from bleaching.
The more useful diagnostic sequence is:
Check the tissue → measure underwater PAR → compare with previous exposure → review temperature → review nutrient trends → check chemistry, flow and feeding.
Instead of asking:
“Is 200 or 250 PAR too much for LPS?”
ask:
“What changed in this coral’s environment, and how different is that from the conditions it was already adapted to?”
That question is far more useful for understanding coral bleaching.
Related AquaHorti Guides
- Reef Light Measurement Guide
- PAR and PPFD Explained
- Understanding Underwater PAR Measurements
- Measurement Glossary
- AquaHorti AH-Reef Underwater PAR Meter
References
- NOAA Ocean Service. What Is Coral Bleaching?
- Eyal, G., Cohen, I., Eyal-Shaham, L., Ben-Zvi, O., Tikochinski, Y., & Loya, Y. (2019). Photoacclimation and induction of light-enhanced calcification in the mesophotic coral Euphyllia paradivisa. Royal Society Open Science, 6, 180527. DOI: 10.1098/rsos.180527.
- Abrego, D., Ulstrup, K. E., Willis, B. L., & van Oppen, M. J. H. (2008). Species-specific interactions between algal endosymbionts and coral hosts define their bleaching response to heat and light stress. Proceedings of the Royal Society B, 275, 2273–2282.
- Wiedenmann, J., D’Angelo, C., Mardones, M. L., et al. (2023). Reef-building corals farm and feed on their photosynthetic symbionts. Nature, 620, 1018–1024. DOI: 10.1038/s41586-023-06442-5.
- Current reviews of coral–Symbiodiniaceae symbiosis and bleaching physiology describing interactions among light, temperature, nutrient availability and photo-oxidative stress.