Routine dental curing light output check

Is your curing light still bright — but weaker than before?

AH-DCLM lets you check actual dental curing light irradiance instead of judging output by whether the lamp still turns on. Measure Blue and UVA, view Blue/UVA/total readings on your phone, keep the tip position more repeatable with the 8.1 mm opening, and use Max Mode to capture peak output.

Price: $39.80 U.S. reference price. Price and availability may vary.
Choose the marketplace that works for you.
Blue + UVATwo-channel irradiance view
Phone ReadingsBluetooth connection
Max ModeCaptures the highest reading
AH-DCLM dental curing light meter showing UVA and Blue irradiance readings
Made for dental curing light checks
AH-DCLM

A curing light can still turn on even when its measured output changes.

AH-DCLM is designed for routine output checks: measure irradiance, keep tip placement more consistent, compare results between checks, and capture the highest reading during an exposure.

📱

Read from your phone

See the measurement on your phone instead of relying on a small display beside the light source.

🎯

Fixed test position

The 8.1 mm opening helps keep tip position more consistent from one check to the next.

↗️

Capture peak output

Max Mode records the highest irradiance reading for quick comparison and evaluation.

Curing light measurement with readings viewed on a phone
PHONE VIEW

See readings away from the beam

The meter sends the measurement to your phone by Bluetooth, making the result easy to read during the test.

✓Blue and UVA readings in one view
✓Large numerical display
✓No internet required for normal use
Fixed 8.1 mm test opening for dental curing light tip
REPEATABLE POSITION

Put the tip in the same place each time

A fixed 8.1 mm opening helps control the tip position so checks are easier to compare over time.

✓Helps reduce positioning differences
✓Simple insert-and-measure workflow
Max Mode capturing peak dental curing light irradiance
MAX MODE

Capture the highest output

Use Max Mode to record the highest irradiance reading, making it easier to evaluate curing light performance quickly and consistently.

✓Records the highest reading
✓Useful for quick comparisons
SIMPLE WORKFLOW

From power-on to reading in three steps

Bluetooth connection keeps setup straightforward for routine checks.

Three-step Bluetooth setup for AH-DCLM dental curing light meter
1

Power on

Press and hold the side button.

2

Open the app

Launch AquaHorti and connect by Bluetooth.

3

View results

Read UVA, Blue, total irradiance, and Max Mode results on the phone.

BLUETOOTH ONLY FOR NORMAL USE

No internet connection required

Normal measurement works through Bluetooth. The app can be used even when the phone is not connected to the internet.

AH-DCLM works with Bluetooth without an internet connection
FAQ

Before you measure

Does the meter need an internet connection?

No for normal measurement. The meter communicates with the phone through Bluetooth.

Why is the fixed opening useful?

Distance and alignment can affect a light measurement. Using the same opening helps keep the test position more consistent.

What does Max Mode do?

Max Mode records the highest irradiance value observed during the measurement so you can check peak output quickly.

AH-DCLM

Ready to check your curing light?

Choose your country and continue to the appropriate purchase marketplace.

Price: $39.80 U.S. reference price. Price and availability may vary.